Skip to main content

Midea Portable Air Conditioner Error Codes

 

Midea Portable Air Conditioner Error Codes
Midea Portable Air Conditioner Error Codes
Error CodesCause
E1Room temperature sensor error- Unplug the unit and plug it back in. If error repeats, call for service
E2Evaporator temperature sensor error- Unplug the unit and plug it back in. If error repeats, call for service.
E4Display panel communication error- Unplug the unit and plug it back in. If error repeats, call for service.
E5The auto sliding panel malfunction- Unplug the unit and plug it back in. If error repeats, call for service.
E0Unit malfunction- Unplug the unit and plug it back in. If error repeats, call for service.

INDICATOR LIGHTS display

  • lights up when the POWER is on.
  • lights up when LOCK function is set.
  • lights up when TIMER ON function is set.
  • lights up when TIMER OFF function is set.
  • lights up when FOLLOW ME function is set.
  • lights up when SLEEP function is set.
  • lights up when FRESH function is set by remote controller.

Midea Portable Air Conditioner Troubleshooting

Please check the machine according to the following form before asking for maintenance:

Problem: Unit does not turn on when pressing ON/ OFF button

Possible Cause:

  1. P1 Error Code.
  2. In COOL mode: room temperature is lower than the set temperature.

Troubleshooting:

  1. The water collection tray is full. Turn off the unit, drain the water from the water collection tray and restart the unit.
  2. Reset the temperature.

Problem: Unit does not cool well

Possible Cause:

  1. The air filter is blocked with dust or animal hair.
  2. Exhaust hose is not connected or is blocked.
  3. The unit is low on refrigerant.
  4. Temperature setting is too high.
  5. The windows and doors in the room are open.
  6. The room area is too large.
  7. There are heat sources inside the room.

Troubleshooting:

  1. Turn off the unit and clean the filter according to instructions.
  2. Turn off the unit, disconnect the hose, check for blockage and reconnect the hose.
  3. Call a service technician to inspect the unit and top off refrigerant.
  4. Decrease the set temperature.
  5. Make sure all windows and doors are closed.
  6. Double-check the cooling area.
  7. Remove the heat sources if possible.

Problem: The unit is noisy and vibrates too much

Possible Cause:

  1. The ground is not level.
  2. The air filter is blocked with dust or animal hair.

Troubleshooting:

  1. Place the unit on a flat, level surface.
  2. Turn off the unit and clean the filter according to instructions.

Problem: The unit makes a gurgling sound

Possible Cause: This sound is caused by the flow of refrigerant inside the unit

Troubleshooting: This is normal.

Midea Portable Air Conditioner Troubleshooting
Midea Portable Air Conditioner Troubleshooting

Clean the Air Filter

  • Be sure to clean the air filter every 2 weeks for optimal performance.
  • The water collection tray should be drained immediately after P1 error occurs, and before storage to prevent mold.
  • In households with animals, you will have to periodically wipe down the grill to prevent blocked airflow due to animal hair.
Midea Portable AC Clean the Air Filter
Midea Portable AC Clean the Air Filter

 

Midea Portable Air Conditioner
Midea Portable Air Conditioner

Midea Portable Air Conditioner Manual PDF

Labels:

Comments

Post a Comment

Popular posts from this blog

AUX Air Con Error Codes

Aux Air Conditioner Troubleshooting November 3, 2018 at 9:18 pm If the following phenomena are found, the problem is not from the  air-conditioner itself. Problems The motor is heard operating but the air-conditioner dose not work when the indoor unit is powered on Causes Since the air-conditioner is powered on, it will come to working condition as long as you press the ON/OFF button of the remote control and the Signal is well received. Problems The compressor stops running but the indoor fan motor keeps working when it is at cooling mode with the indoor temperature higher than set temperature. Causes If you turn off the air-conditioner and restart it immediately, it will return to normal in 3 minutes, after that, the air-conditioner will automatically adjust the indoor fan speed to what you set. Problems The compressor works discontinuously at dehumidifying mode. Causes The air-conditioner will automatically control the working of the compressor according to the ...
4 comments
Read more

Rittal Air Conditioner Error Codes

  System messages are shown on the display screen of the Comfort controller via the displays A1 to A20 and E0. Rittal Air Conditioner Error Codes Error Codes System message Possible cause A1 Enclosure door open Door open or door limit switch incorrectly positioned A2 Internal temperature of enclosure too high Cooling capacity inadequate/unit undersized. Error as a consequence of messages A03 to A17. A3 Filter monitoring Filter mat soiled A4 Ambient temperature too high/too low Ambient temperature outside of admissible operating range (+10°C to +60°C) A5 Icing hazard Operational display in case of icing hazard. A6 PSAH pressure-operated switch Ambient temperature too high A7 Evaporator coil Lack of coolant; sensor in front of or behind condenser defective. A8 Condensate warning Condensate discharge kinked or blocked A9 Condenser fan blocked or defective Blocked or defective A10 Evaporator fan blocked or defective Blocked or defective A11 Compressor Compressor overloaded A12 Condense...
Post a Comment
Read more

Acson AC Error Codes and Troubleshooting

Acson AC Error Codes and Troubleshooting   The code indication changes as shown below, and notifies with a long beep. Wall Mounted AC Inverter Unit Error Codes Operation / Faulty Indication E1 Room air sensor contact loose / short. Check room sensor connection / change room sensor E2 Indoor coil sensor contact open. Check indoor coil sensor connection / change indoor coil sensor E3 Outdoor coil sensor contact open. Check outdoor coil sensor connection / change outdoor coil sensor E4 Compressor overload protection / Indoor / Outdoor coil sensor short. If running ampere highly increase, change the compressor. If not, replace the coil sensor E5 Gas leak. Check for leakage & repair / Top up refrigerant E6 Pump fault. Clear the clogging at drain pipe. If pump is not working, change the pump E7 Outdoor coil sensor exist (MS model). Remove outdoor coil sensor E8 Hardware error (tact switch pin short). Check for the tact switch pin condition E9 No Feedback from indoor fan. Check indoor...
Post a Comment
Read more